| Audio Channels | 16 analog inputs, 16 analog outputs |
|---|
| Dante® Audio Format | Dante®/AES67 digital audio in/out; 44.1kHz, 48kHz, 88.2kHz or 96kHz; 16-bit or 24-bit |
|---|
| Audio Latency | Dante® device latency of 2, 3, 4, 5 or 10ms, set in Dante® Controller |
|---|
| Network Bandwidth | Dante® network, 1000Mbps |
|---|
| Transmission Distance | 328ft (100m) over CAT6/6A/7 |
|---|
| THD+N | < 0.01% at +4dBu, 1kHz |
|---|
| S/N Ratio | at least 105dB at +4dBu, 1kHz, A-weighted |
|---|
| Dynamic Range | at least 105dB at +4dBu, 1kHz, A-weighted |
|---|
| Frequency Response | 20Hz to 20kHz (+/-0.5dB) |
|---|
| Connectors | 16 × XLR/TRS combo, female |
|---|
| Signal | Analog audio, balanced or unbalanced |
|---|
| Input Level, Line | Max +24dBu (12.28Vrms) balanced; max +18dBu (6.14Vrms) unbalanced |
|---|
| Input Level, Mic | Min -35dBV |
|---|
| Input Sensitivity | +24dBu, +14dBu, +4dBu, 0dBV, -18dBV or -35dBV, per input |
|---|
| Input Gain Trim | -12dB to +12dB in 0.1dB steps |
|---|
| Input Impedance | 20k Ohm balanced; 10k Ohm unbalanced |
|---|
| Phantom Power | +48V, switchable per input |
|---|
| Connectors | 16 × XLR, male |
|---|
| Signal | Analog audio, balanced or unbalanced |
|---|
| Output Level | Max +20dBu (7.75Vrms) balanced; max +14dBu (3.875Vrms) unbalanced; min -18dBV |
|---|
| Output Level Selection | +20dBu, +14dBu, +4dBu, 0dBV or -18dBV, per output |
|---|
| Output Impedance | 600 Ohm balanced; 300 Ohm unbalanced |
|---|
| XLR Pinout | Pin 1 Ground/Shield; Pin 2 Positive/Hot; Pin 3 Negative/Cold (inputs and outputs) |
|---|
| Parametric EQ | 8 bands on every input and output |
|---|
| Filter Types | Parametric, Lowpass, Highpass, Low Shelf, High Shelf |
|---|
| EQ Gain | -15dB to +15dB in 0.1dB steps |
|---|
| EQ Frequency | 20Hz to 20kHz |
|---|
| EQ Q | 0.02 to 16 in 0.01 steps |
|---|
| Output Delay | Adjustable per output |
|---|
| Presets | 5 scenes |
|---|