4K60Hz HDMI KVM Extender over Cat6 - 70M
KanexPro EXT-HDMIKVM70M HDMI KVM extender — 4K@60Hz HDR + USB 2.0 keyboard/mouse/PTZ over single Cat6 to 70M. Zero latency, HDCP 2.2, 3-year warranty.
The KanexPro EXT-HDMIKVM70M adds KVM (keyboard, mouse, PTZ camera, and touchscreen) control to a zero-latency 4K@60Hz HDMI extension system — all over a single Cat6 cable to 70M. Transmit full 4:4:4 HDR video and USB 2.0 peripheral signals simultaneously without separate KVM extender hardware. The KVM USB 2.0/1.1 channel supports keyboards, mice, PTZ cameras, and touchscreen devices at the receiver end. ARC S/PDIF audio de-embed, bi-directional IR, HDCP 2.2, and zero configuration complete the package. Backed by KanexPro's 3-year warranty.
- Zero latency 4K@60Hz HDR + KVM USB 2.0/1.1 over single Cat6 up to 70M
- KVM supports keyboard, mouse, PTZ cameras, and touchscreen devices
- HDCP 2.2 and EDID support for multiple display types
- Bi-directional IR pass-through 20-60KHz — IR blasters included
- ARC S/PDIF digital audio de-embedded output on receiver
- Zero configuration plug-and-play setup
- Compact aluminum chassis: 106x99x26.2mm, 260g TX/RX
- 3-year KanexPro parts and labor warranty
Specifications| Specification | Value |
|---|
| HDMI / HDCP | HDMI 2.0 | HDCP 2.2 |
|---|
| Max Resolution | 4K x 2K @ 60Hz (4:4:4 HDR) |
|---|
| KVM | USB 2.0/1.1 — keyboard, mouse, PTZ, touchscreen |
|---|
| Cable | Single Cat6 / Cat6a |
|---|
| Max Distance | 70M (230 ft.) at 4K@60Hz |
|---|
| IR | Bi-directional 20-60KHz (TX/RX included) |
|---|
| Audio | ARC S/PDIF de-embedded on RX |
|---|
| Power | DC 5V-12V | TX less than 4W | RX less than 4W |
|---|
| Dimensions | 106 x 99 x 26.2mm (TX and RX) |
|---|
| Weight | TX 260g | RX 260g |
|---|
| Operating Temp | -20 to 60 degrees C |
|---|
Questions
- What is the maximum video resolution and distance?
- 4K x 2K @ 60Hz 4:4:4 HDR to 70M (230 ft.) over a single Cat6 or Cat6a cable, HDMI 2.0 with HDCP 2.2, at zero latency.
- What USB device types are supported at the receiver?
- USB 2.0 and 1.1 devices: keyboard, mouse, PTZ cameras and touchscreens.
- Can I connect a webcam or PTZ camera to the receiver USB port?
- Yes. The KVM channel carries USB 2.0/1.1 and PTZ cameras are supported.
- Does it pass IR, and in which direction?
- Both directions, 20-60KHz, with IR blasters included for transmitter and receiver.
- How is the kit powered?
- DC 5V-12V, with the transmitter drawing under 4W and the receiver under 4W.
- What cable should be run between the two units?
- A single Cat6 or Cat6a. Both units are 106 x 99 x 26.2mm and 260g.
- A USB device at the receiver is not detected.
- The KVM channel is USB 2.0/1.1. A device that requires USB 3.0 speeds will not enumerate on this link.
- There is no audio on the separate audio output.
- The receiver de-embeds ARC S/PDIF digital audio. Check that the display or source is set to output over ARC.
- Can I take audio out separately from the display?
- Yes, the receiver has an ARC S/PDIF de-embedded output.
- Will it drive different display types?
- Yes, it carries HDCP 2.2 and supports EDID for multiple display types.