4K HDBaseT™ Repeater with 1x2 HDMI® Splitter - Discontinued
Discontinued
KanexPro no longer makes the EXT-HDRPT100M. The support information below still applies to units in service.
Support notes
- Replacement power adapter for the EXT-HDRPT100M: the KanexPro EXT-PSU7 (DC 12V, with a locking connector and a 10 ft cable). The EXT-HDRPT100M needs DC 12V, 2A. The EXT-PSU7 is rated for more current than the EXT-HDRPT100M needs; at the same voltage that is compatible, because the EXT-HDRPT100M draw
Daisy Chain & Extend Several 4K displays up to 100 meters
Discontinued. Special Order Only The KanexPro EXT-HDRPT100M is a 4K based signal repeater extender designed with one HDBaseT™ input and one HDBaseT output to create a daisy-chainable path to several displays with each repeater supporting up to 330’ (100 meters) in distance. It provides two HDMI output ports and two RS-232 ports dedicated for each output to control displays. The RS-232 ports can be used to send commands (such as power on/off) to compatible displays and projectors. When RS-232 is under control from the display each repeater in the daisy chain can be individually addressed for sending specific commands at the particular node. And reach repeater is assigned with a unique address from the front-panel rotary dial (0-F). Professionally designed for digital signage applications, one can extend HDMI signals to two or more displays using a single HDMI device such as a media player or a PC. Furthermore, it lets you loop out to another HDBaseT repeater to daisy chain more displays. Also supports built-in audio de-embedding using phoenix connectors to 2-channel stereo or an amp. It supports HDCP 2.2 specs with 4K@24, 30, 50 & 60Hz video resolutions with a 4:2:0 sampling rate up to 10 bit for better HDR support and color depths. Daisy chain Up to 8 Repeaters The CAT5e/6 distance supported from one HDBaseT repeater to another is 330 feet (100meters). Up to eight repeaters can be used in a chain creating a sixteen display signage connected from