Flexible Matrix System Transceiver | Next Gen Modular Matrix
Discontinued
KanexPro no longer makes the EXT-PROMATRIXUSB. The support information below still applies to units in service.
Support notes
- PoE on the EXT-PROMATRIXUSB cannot be turned off or on in firmware. It needs an 802.3af PoE port on a 10GbE switch. If a unit will not power from any PoE switch but works on its own power supply, its PoE circuit is faulty: contact KanexPro support for an RMA.
Make setup a snap with the SDVoE powered Modular Matrix system w/ USB, PE & RS--232
Next Gen Modular Matrix System The KanexPro SDVoE powered Modular Matrix system is the most versatile flexible video distribution solution. The system is composed of transceiver devices that can be configured as either video transmitters or receivers with a simple click of a mouse. The whole system is controlled and configured by a single control module which makes setup a snap. Transmitters and Receivers in One Device The KanexPro Flexible matrix transceiver (EXT-PROMATRIXUSB) is an SDVoE IP powered encoder/decoder solution. Each transceiver features with one HDMI input and output, three USB 2.0, phoenix connectors for audio in and out and a LAN (Ethernet) port with RS-232 control port. The encoders use the advanced SDVoE technology to transmit full UHD 4K/60 video from HDMI based devices with lossless video and audio with absolutely zero latency. It supports POE (power over Ethernet) when connected with a POE network switch with distances over a single CAT6a up to 330 ft. (100m) delivering one to one, one to many and many to many over the 10G Ethernet switch. Additionally, this unit supports matrix, video wall, picture in picture (PiP) and multiviewer modes when controller (EXT-PROCTRL) is connected to the network. The controller configures settings of all connected Transmitter/Receiver units, including IP address, netmask and extender status are clearly displayed within the WebGUI. The WebGUI is easily accessed via a web browser over a normal network connection