Single HDMI 2.0® Wallplate over HDBaseT™ w/ IR & PoC
Discontinued
KanexPro no longer makes the WP-EXTHDBTX1. The support information below still applies to units in service.
Support notes
- Replacement power adapter for the WP-EXTHDBTX1: the KanexPro EXT-PSU2 (DC 24V, 1.25A). The WP-EXTHDBTX1 needs DC 24V, 1A. The EXT-PSU2 is rated for more current than the WP-EXTHDBTX1 needs; at the same voltage that is compatible, because the WP-EXTHDBTX1 draws only the current it uses. Buy the EXT-P
Extend Single HDMI® source from a Wall Plate up to 70 meters with control
The KanexPro WP-EXTHDBTX1 is a US Decora style single gang HDMI 2.0® wall plate transmitter designed for connecting one HDMI device such as a laptop, Blu-ray, or a 4K media player remotely over CAT5/6 up to 230 ft. (70 meters). The outputs is via HDBaseT port. It supports full 18 Gbps bandwidth with true 4K video resolutions up to 4/60Hz, HDCP 2.2 compliant and will extend 4K up to 40m delivering color sampling rate of 4:4:4. PoC & Control The wall plate transmitter supports PoC – power over cable requiring only power supply from the Receiver optional, part EXT-WP70POCRX side to operate. It also supports bi-directional IR control and RS-232 control for devices to and from the display. Applications: Ideal for use with court rooms, classrooms, conference rooms or showrooms where audio-visual devices can be extended from a remotely located HDMI source device. This single-gang HDMI wall plate can be used anywhere to enhance signal integrity over CAT5e/6 cabling.