Bluetooth to Dante Wall Plate, 1-Gang US, PoE
AUD-DTE-WPBT Bluetooth to Dante wall plate, US 1-gang, PoE. Bluetooth 5.1 aptX HD/AAC, two devices, AES67, TCP/IP and web control for commercial AV rooms.
Puts guest Bluetooth audio straight onto a Dante or AES67 network at the wall, from up to two phones, tablets or laptops at once, in a US 1-gang plate on one PoE drop. Per-channel 8-band EQ, input gain and a nameable Bluetooth name are built in. Bluetooth volume, mute and pairing are run from the RelayAV app, with every control reachable through RelayAV's API and MCP. Plan it in the KanexPro System Planner with the rest of the room (one drawing and parts list). Puts guest Bluetooth audio straight onto a Dante® or AES67 network at the wall, with no separate receiver, no analog hop and no second power supply. The AUD-DTE-WPBT is a US 1-gang wall plate that runs on a single Class 0 IEEE 802.3af PoE drop, or a local 12V DC supply where the switch does not provide PoE. It draws 1.8W at most and connects up to two Bluetooth 5.1 phones, tablets or laptops at the same time. It is the right choice for huddle rooms, classrooms, function rooms and fitness studios where a fixed, controllable BYOD audio point on the Dante network matters more than analog I/O. The plate decodes SBC, AAC, aptX, aptX Low Latency and aptX HD and sends the audio out as Dante at 44.1 to 96kHz, with device latency set to 2, 3, 4, 5 or 10ms in Dante Controller. It also supports AES67 RTP transport for non-Dante systems. It has a configurable Bluetooth name, call or media bridging and an 8-band parametric EQ per channel. In RelayAV, the KanexPro control app, you set its Bluetooth volume and mute, open the pairing
- Dante® network wall plate for Bluetooth input in a standard US 1-gang format
- Up to two Bluetooth devices connected at the same time
- Bluetooth 5.1 with SBC, AAC, aptX, aptX Low Latency and aptX HD codecs, at 44.1–48kHz and 16/24-bit
- Control from the front-panel button, in RelayAV (Bluetooth volume, mute and pairing; input gain, mute and stereo), or over TCP/IP and Telnet
- Class 0 IEEE 802.3af PoE, so any PoE switch can power the plate
- Configurable Bluetooth name of up to 24 bytes, so users in rooms with several plates can find the right one
- 8-band parametric EQ per channel with parametric, low-pass, high-pass, low-shelf and high-shelf filters; EQ settings can be copied, exported and imported
- Switching between connected Bluetooth sources: audio moves to the second device when the playing device pauses or disconnects
- Bluetooth volume adjustment from 0 to 100, with mute and linked or independent left/right control
- Pairing window adjustable from 30 to 300 seconds (60 seconds by default), or open pairing with no time limit
Specifications| Input | Two-channel Bluetooth audio |
|---|
| Output | Dante® 2-channel output |
|---|
| Bluetooth audio format | Bluetooth 5.1; SBC, AAC, aptX, aptX LL, aptX HD; 2 channels; 44.1–48kHz; 16/24-bit |
|---|
| Dante® audio format | 2 channels; 44.1, 48, 88.2 and 96kHz; 16/24-bit |
|---|
| AES67 | AES67 RTP audio transport |
|---|
| Audio latency | Dante® device latency of 2, 3, 4, 5 or 10ms, set in Dante® Controller |
|---|
| Frequency response | 20Hz–20kHz |
|---|
| Signal-to-noise ratio | >= 100dB |
|---|
| THD+N | <= 0.1% |
|---|
| Version | Bluetooth 5.1, internal antenna |
|---|
| Simultaneous connections | Up to 2 devices |
|---|
| Bluetooth name | Configurable, up to 24 bytes |
|---|
| Pairing window | 30–300 seconds (default 60 seconds), or no time limit |
|---|
| Volume | 0–100, with mute |
|---|
| Audio bridging | Call, media (default), or call and media |
|---|
| Transport control | Previous track, next track, play/pause |
|---|
| Metadata | Artist, album and track |
|---|
| Parametric EQ | 8 bands per channel; linked or independent left/right |
|---|
| Filter types | Parametric, low-pass, high-pass, low shelf, high shelf |
|---|
| EQ gain | -15dB to +15dB, 0.1dB steps |
|---|
| EQ frequency | 20Hz–20kHz, 1Hz steps |
|---|
| EQ Q | 0.02–16, 0.01 steps |
|---|
| Input gain | -12dB to +12dB, 0.1dB steps |
|---|
| Network bandwidth | 100Mbps |
|---|
| Transmission distance | 328 ft (100m) over CAT6/6A/7 |
|---|
| Dante® configuration | Dante® Controller |
|---|
| Control methods | Front-panel PAIR button, RelayAV, TCP/IP and Telnet API |
|---|
| Default TCP/IP port | 8000 |
|---|
| Default Telnet port | 23 |
|---|
| IP mode | DHCP (default) or static |
|---|
Questions
- What are its audio performance figures?
- Frequency response is 20Hz to 20kHz, signal-to-noise ratio is 100dB or better, and THD+N is 0.1% or less. The Bluetooth input itself runs at 44.1 to 48kHz, 16/24-bit, over 2 channels.
- What are its size, weight and operating conditions?
- It is a US 1-gang wall plate measuring 1.77 x 1.57 x 4.13 in (45 x 40 x 105 mm) and weighing 0.33 lbs (0.15 kg). It operates from 32F to 104F (0C to 40C) at 20% to 80% RH, non-condensing, and draws 1.8W at most.
- What are the API commands for volume, mute and pairing?
- set bt vol x sets the volume from 0 to 100, and set bt vol+ or set bt vol- steps it. set bt mute on/off mutes and unmutes. set bt discoverable/pairing on/off opens or closes pairing, and get bt connection reports which devices are connected.
- Which ports does the API use, and how do I connect?
- Open a TCP/IP session on port 8000 or a Telnet session on port 23 to the plate's IP address from the same LAN. Both ports can be changed (1-65535) with set tcp/ip port and set telnet port. Type ? or help to list every command.
- What does the network switch have to provide?
- A 100Mbps Ethernet port. If you want the switch to power the plate, the port must supply IEEE 802.3af PoE (the plate is a Class 0 device). If the switch has no PoE, wire a 12V/1A DC supply to the 2-pin 3.5mm Phoenix connector. The adapter is not included.
- What network cable and run length does it need?
- Use a straight-through CAT6, 6A or 7 cable up to 328 ft (100m), never a crossover cable. Terminate both ends in the same order: white-orange, orange, white-green, blue, white-blue, green, white-brown, brown.
- My phone cannot see the plate in its Bluetooth list. What should I do?
- By default the plate is discoverable only for 60 seconds after power-on, and the PAIR LED goes off when that window ends. Short-press PAIR to open pairing again: the LED flashes while it waits for a device. If the LED flashes three times instead, two devices are already connected, so disconnect one
- The yellow LINK LED on the Dante port is off. What should I check?
- Check that the cable is straight-through, not crossover, with both ends terminated in the same order, and that the run is no longer than 328 ft (100m). Then check that the switch port supplies IEEE 802.3af PoE. If the port has no PoE, connect a 12V/1A supply to the DC input. Once the link is good, L
- What about latency when users play video?
- On the Dante side, device latency is set in Dante Controller at 2, 3, 4, 5 or 10ms. The Bluetooth link adds its own delay, which depends on the codec the source device uses. aptX Low Latency gives the shortest delay on devices that support it. For lip-sync-critical video, a wired source is still the
- What does the AUD-DTE-WPBT do?
- It is a wall plate that receives two-channel Bluetooth audio from a phone, tablet or laptop and puts it straight onto a Dante network as digital audio, with no analogue stage in between. It also supports AES67, so it can feed AES67 systems as well as Dante.