Digital to Analog Audio Decoder Down Mixer
Convert digital S/PDIF or optical (TOSLINK) audio to stereo RCA with the KanexPro AUD2ACV – compact, 48?kHz support, ideal for legacy systems
The KanexPro Digital to Analog Audio adapter converts your digital S/PDIF or Optical (TOSLINK) audio input source to RCA output. Ideal for connecting equipment such as an A/V receiver or a recording deck via the standard RCA connectors. Now you can link your legacy sound system with digital sources such as a Blu-ray player, DVD and CD players that lacks the RCA-style analog outputs. The converter is compact in size and requires minimal setup.
- Supports uncompressed 2-channel PCM analog stereo audio output.
- Supports output sampling rate at 48 KHz
- Provides electromagnetic-noise-free transmission
- Easy to install and simple to operate
- Compact size
- Power supply included
Specifications| Interface | Audio |
|---|
| External Power Supply | 5V DC @ 1A |
|---|
| Power Consumption | 0.5 watts (max) |
|---|
| Sampling rate | 48KHz |
|---|
| Regulatory Approvals | FCC, CE, UL |
|---|
| Dimensions | 2”x1.6”x1” (51x41x26mm) |
|---|
| Weight (Net) | 0.17lbs (78g) |
|---|
| Warranty | 1 Year parts and labor |
|---|
Questions
- What audio does it output?
- Uncompressed 2-channel PCM analog stereo, at a 48KHz sampling rate.
- How is it powered and what does it draw?
- An external 5V DC @ 1A supply, drawing 0.5 watts at most.
- Will it down-mix a multi-channel digital source to stereo?
- Yes, that is what the decoder does: digital in, analog stereo out.
- Is it approved for commercial installation?
- It carries FCC, CE and UL approvals.
- How large is it and where can it sit?
- 2in x 1.6in x 1in (51 x 41 x 26mm) and 0.17 lbs (78g), so it fits behind a display or inside a lectern.
- Is any configuration needed?
- No. It is fixed-function: connect the digital source and the analog destination and it runs.
- The analog output is silent.
- Confirm the source is sending at 48KHz. That is the sampling rate the decoder supports.
- There is audible noise on the analog run.
- The unit is built for electromagnetic-noise-free transmission; noise on the output usually comes from the analog cable run or a ground loop after the decoder rather than from the decoder.
- What warranty does it carry?
- One year, parts and labour.
- Is it suitable for feeding an amplifier with no digital input?
- Yes, that is the purpose: it presents analog stereo to equipment that cannot take a digital feed.