Name: 4K60 4:4:4 JPEG2000 AV over IP Encoder — Dante Ready with Contact Control
Brand: KanexPro
SKU: AVO-IPJP2K-ENC

Question 1

What input and output color depth does the AVO-IPJP2K-ENC handle?

Accepted Answer

It accepts 8, 10, or 12-bit color at the input and outputs 8-bit. Color space covers RGB 4:4:4 and YCbCr 4:4:4 / 4:2:2 / 4:2:0.

Question 2

What are the HDMI and HDCP compliance figures and the video bandwidth?

Accepted Answer

The AVO-IPJP2K-ENC is HDMI 2.0b and HDCP 2.2 compliant with 18Gbps video bandwidth. Video is carried as JPEG2000 over a 1G network.

Question 3

How is the AVO-IPJP2K-ENC controlled within a larger system?

Accepted Answer

The system is driven by a Controller Box or a third-party controller; the command set lives in the separate Video over IP Controller manual, not the device manual.

Question 4

What network interfaces are available for configuration and integration?

Accepted Answer

It has a built-in web page for configuration plus Telnet and SSH access. Bonjour discovery advertises the encoder with an AST-ENC host-name prefix.

Question 5

What switch does the AVO-IPJP2K-ENC require on the network?

Accepted Answer

Use a Layer-3 managed gigabit switch with 8KB jumbo frame support and IGMP snooping enabled.

Question 6

How do I connect analog and digital audio at the encoder?

Accepted Answer

Analog L/R audio in and out use 3-pin 3.81mm Phoenix connectors, and there is one S/PDIF optical output. Analog AUDIO IN can be embedded into HDMI or looped out.

Question 7

No video reaches the displays?

Accepted Answer

Confirm the encoder and its decoders are on the same network segment and paired, and that the managed switch has IGMP snooping and jumbo frames enabled. Check the LINK LED is on.

Question 8

The LINK LED flashes?

Accepted Answer

The input signal is missing or incompatible. Set the source within 4K60 4:4:4 (HDMI 2.0b / HDCP 2.2) and confirm the HDMI IN cable is seated.

Question 9

Is JPEG2000 quality good enough for 4K60 4:4:4 content, including text and graphics?

Accepted Answer

Yes. JPEG2000 is visually lossless at 4K60 4:4:4 with sub-frame latency, which is why it is used in command centers and courtrooms where text clarity and KVM responsiveness matter. It avoids the visible artifacts and lag of H.264/H.265 systems while fitting a 1GbE pipe that uncompressed 10G systems

Question 10

Do we get Dante audio out of the box?

Accepted Answer

The hardware supports Dante AV-A, activated by license. That lets you attach Dante only on the projects that need converged audio, rather than paying for it on every endpoint - and it puts the video system's audio on the same network as the rest of the Dante plant.