4K60 HDMI 2.0 Input Card for Flex Matrix Pro
KanexPro FLEX-PROHDMI-IN 4-port hot-swappable HDMI 2.0 input card for Flex Matrix Pro chassis. 4K60 4:4:4, 18Gbps, HDCP 2.2, Dante/AES67, TAA compliant.
Add four HDMI 2.0 source inputs to any Flex Matrix Pro chassis with a single hot-swappable card. The FLEX-PROHDMI-IN slides into any input slot across the Pro 16×16, 32×32, 64×64, and 128×128 frames, delivering 4K/UHD 60Hz 4:4:4 at 18Gbps with HDCP 2.2, HDR, independent scaling, and Dante/AES67 audio support per port. Auto cable compensation, signal reclocking, EDID/HDCP management, seamless switching. TAA compliant. Hot-swappable without powering down.
- 4× HDMI 2.0 Type A inputs per card — scales across all Flex Matrix Pro chassis (16×16 to 128×128)
- 4K/UHD 60Hz 4:4:4 at 18Gbps • HDCP 2.2 • HDR • 8ch LPCM High-Res Audio
- Dante/AES67 network audio support • Dante Controller • Dante Domain Manager ready
- Independent scaling per input • seamless switching • EDID and HDCP management
- Automatic cable compensation and signal reclocking for reliable long-run HDMI connections
- Hot-swappable — insert or replace without powering down the chassis
- HDMI-to-DVI format correction • +5VDC 250mA power on each port for peripheral devices
Specifications| Ports | 4× HDMI Type A (19-pin female) inputs |
|---|
| HDMI Standard | HDMI 2.0, HDCP 2.2, HDR |
|---|
| Resolution | Up to 4K/60Hz 4:4:4 (4096×2160) |
|---|
| Bandwidth | 18Gbps per port |
|---|
| Audio | 8ch LPCM High-Res, Dante/AES67 |
|---|
| Scaling | Independent per input |
|---|
| Switching | Seamless (glitch-free) |
|---|
| Signal Processing | Auto cable compensation, auto reclocking |
|---|
| Port Power | +5VDC 250mA per HDMI port |
|---|
| Compatibility | All Flex Matrix Pro chassis (16×16 to 128×128) |
|---|
| Compliance | TAA Compliant, Hot-swappable |
|---|
Questions
- How many HDMI inputs does the FLEX-PROHDMI-IN provide and what connector does it use?
- The card provides 4 HDMI Type A (19-pin female) inputs.
- What resolution, bandwidth, and HDCP level does the FLEX-PROHDMI-IN support?
- Each input supports video resolutions up to 4K/60Hz 4:4:4 (4096x2160) at a bandwidth of 18Gbps per port, with HDMI 2.0 and HDCP 2.2 compliance and HDR support.
- Which Flex Matrix Pro chassis models is the FLEX-PROHDMI-IN compatible with?
- FLEX-PRO16X16, FLEX-PRO32X32, FLEX-PRO64X64, and FLEX-PRO128X128.
- How many HDMI inputs can the FLEX-PROHDMI-IN provide in each chassis size?
- FLEX-PRO16X16 has 4 input slots for up to 16 HDMI inputs, FLEX-PRO32X32 has 8 input slots for up to 32, FLEX-PRO64X64 has 16 input slots for up to 64, and FLEX-PRO128X128 has 32 input slots for up to 128, at 4 ports per FLEX-PROHDMI-IN card.
- How is the FLEX-PROHDMI-IN card installed in a Flex Matrix Pro chassis?
- Locate an available input card slot on the rear panel, align the card with the slot guide rails, and slide it firmly into the slot until it seats completely and the retention mechanism engages; the chassis then automatically detects the card.
- How do I verify the FLEX-PROHDMI-IN card was detected after installation?
- Check detection via the 7-inch front panel touch control or the Web GUI under the System Info page.
- The FLEX-PROHDMI-IN card is not detected after insertion. What should I do?
- Ensure the card is fully seated, check the chassis System Info page, try removing and reinserting the card, and if the issue persists, test the card in a different slot.
- There is no video from a source connected to the FLEX-PROHDMI-IN. What should I check?
- Verify the source is active and outputting a signal, check the HDMI cable connection, try a different HDMI port on the card, and verify EDID settings match the source output format.
- Why choose the FLEX-PROHDMI-IN over the FLEX-PROCAT-IN card?
- The FLEX-PROHDMI-IN is for HDMI 2.0 sources connected directly at the chassis, while the FLEX-PROCAT-IN extends sources up to 330 ft (100M) over CAT6A through a separate transmitter; choose the CAT card when the source is not located near the chassis.
- What installation scenario is the FLEX-PROHDMI-IN best suited for?
- It suits projects with HDMI source devices, such as media players or laptops, located at or near the Flex Matrix Pro chassis.