12G-SDI Input Card for Flex Matrix Pro
KanexPro FLEX-PROSDI-IN for Flex Matrix Pro. 12G-SDI (BNC). 4K60, Dante/AES67, TAA.
Add four 12G-SDI (BNC) inputs to any Flex Matrix Pro chassis. The FLEX-PROSDI-IN delivers 4K60 4:4:4 at 11.88Gbps with SMPTE/ITU compliance, scaling, and Dante/AES67 per port. Seamless switching. EDID/HDCP management. Hot-swappable. TAA compliant. 12G/6G/3G/HD-SDI auto-adaptation.
- 4× 12G-SDI (BNC) inputs — hot-swappable across all Flex Pro chassis (16×16 to 128×128)
- 4K60 4:4:4 at 11.88Gbps • HDCP 2.2 • HDR
- Dante/AES67 network audio • 8ch LPCM High-Res Audio
- Independent scaling per input • seamless switching • EDID/HDCP management
- 12G/6G/3G/HD-SDI • up to 11.88Gbps • SMPTE/ITU auto-adaptation • auto reclocking
- Hot-swappable • TAA compliant
Specifications| Outputs | 4 x 12G-SDI Input with scaling |
|---|
| Connector Types | 4 x BNC , 4 x 3pin- Phoenix for Audio Extraction |
|---|
| Supported Cable | 75-ohm Co-axial Cable |
|---|
| Supported Resolutions | 12G-SDI, 6G-SDI, 3G-SDI, and HD-SDI signals |
|---|
| Digital Video Standard | Automatically adapts to SMPTE and ITU digital video standards. |
|---|
| Data Transfer Rate | 11.88 Gbps |
|---|
| Compliant | TAA Compliant |
|---|
Questions
- How many SDI inputs does the FLEX-PROSDI-IN provide and what connector does it use?
- The card provides 4 12G-SDI input ports using BNC connectors with scaling.
- What SDI signal types does the FLEX-PROSDI-IN support?
- It supports 12G-SDI, 6G-SDI, 3G-SDI, and HD-SDI signals, automatically adapting to SMPTE and ITU digital video standards.
- Which Flex Pro chassis models accept the FLEX-PROSDI-IN card?
- It is hot-swappable across all Flex Pro main frame models: FLEX-PRO16X16, FLEX-PRO32X32, FLEX-PRO64X64, and FLEX-PRO128X128.
- Is the FLEX-PROSDI-IN compatible with Dante audio networking?
- Yes, it supports Dante/AES67 network audio, is compatible with Dante Controller software, and is Dante Domain Manager ready.
- Does the FLEX-PROSDI-IN card require its own power adapter?
- No local power adapter is documented for the card itself; it is powered by the Flex Pro chassis.
- Can the FLEX-PROSDI-IN be installed or removed without powering down the chassis?
- Yes. The card is hot-swappable, so it can be installed or replaced in a Flex Pro chassis card slot without taking the matrix offline.
- There is no signal on a FLEX-PROSDI-IN input. What should I check?
- Confirm the SDI source is powered on and actively outputting, verify the coaxial cable and BNC connections are fully seated, and confirm the cable is rated 75-ohm.
- The Flex Pro chassis does not recognize an installed FLEX-PROSDI-IN card. What should I do?
- Remove and reseat the card in its slot; if it is still not recognized, try a different card slot in the chassis.
- Why choose the FLEX-PROSDI-IN over the FLEX-PROHDMI-IN card?
- The FLEX-PROSDI-IN is intended for broadcast and production sources with a native SDI output (12G/6G/3G/HD-SDI), while the FLEX-PROHDMI-IN is intended for HDMI 2.0 sources.
- What installation scenario is the FLEX-PROSDI-IN best suited for?
- It suits broadcast, production, and pro-video environments where source devices output 12G-SDI, 6G-SDI, 3G-SDI, or HD-SDI signals directly at the chassis.