HD-SDI Repeater with Signal Equalization & Re-clocking
Extend SDI or Daisy chain multiple SDI repeaters to create longer runs
The KanexPro 3G/SDI/HD- SDI Repeater is designed for extending AV signals at longer runs up to 300 meters using single RG6 cable . It also embeds audio up to 7.1 channels passing ancillary data. Perfect for surveillance systems, rental & staging facilities, post-production, TV studio, digital cinema, or other A/V applications
- Extend and repeat SDI signals up to 300 meters*
- Auto–input detection for 3G/HD/SD-SDI
- Supports full HD 1080p/60
- Built-in signal equalizer & re-clock function
- 3G mode length up to 130m
- HD mode length up to: 170m
- SD mode length up to 300m
- Audio format support up to 16-channel@24 bit, 48KHz
- Compact & rugged housing
- Locking power supply & mounting ears
Specifications| Input | 1 x SDI |
|---|
| Output | 1 x SDI |
|---|
| Supported Video Resolutions | 3G: 1080p60 / 59.94 / 50; HD: 1080p30 / 29.97 / 25 1080i60 / 59.94 / 50; 720p60 / 59.94 / 50; SD: 625i (PAL) / 525i (NTS |
|---|
| Cable Equalization | HD: 200m of RG6; 140m of RG59; 3G: 140m of RG6 100 m of RG59 |
|---|
| SDI formats | 3G-SDI, HD-SDI, SD-SDI |
|---|
| Supported Audio Formats | up to 16-channels, 24-bit@48KHz |
|---|
| Power: DC in | 7.5V ~ 15V |
|---|
| Regulatory Approvals | FCC, CE, and UL |
|---|
| Warranty | 3-Year parts and labor |
|---|
Questions
- How is the repeater installed in a signal chain?
- Disconnect DC power from the repeater, connect the video source/equipment to the SDI Repeater BNC connectors, then reconnect DC power.
- No signal appears at the repeater output. What should I check?
- Confirm the SDI source is connected to the rear SDI Input Port and the display or downstream equipment is connected to the front SDI Output Port, then check the Status LED: green indicates signal lock, red indicates the signal is un-locked.
- Why does auto-detection across SD, HD, and 3G-SDI matter for field use?
- The repeater automatically detects and adapts to SD-SDI, HD-SDI, or 3G-SDI input, so it can be inserted into a signal chain without manually configuring it for the connected source's format.
- How many audio channels does the repeater carry?
- Per the manual's specification table, the repeater passes 7.1ch, 5.1ch, or Stereo audio embedded in the SDI signal.
- Can multiple SDI-HDRPTPRO units be daisy-chained for longer runs?
- Yes, the repeater is designed to be daisy-chained with additional SDI repeaters to build longer overall cable runs than a single unit can support.
- How is firmware updated on the repeater?
- Firmware is field-upgradable over the integrated Micro-USB port, following the same connect/power-cycle/select-file/Start procedure used across the KanexPro SDI converter line.
- How does daisy-chaining multiple repeaters help longer installations?
- Chaining additional SDI-HDRPTPRO units extends the total achievable cable run further than a single repeater's rated distance, useful for long venue or campus SDI runs.
- What SDI standards does the SDI-HDRPTPRO repeat, and does it auto-detect them?
- It repeats SD-SDI (SMPTE 259M), HD-SDI (SMPTE 292M), and 3G-SDI (SMPTE 424M/425M) signals with auto-input detection across all three standards, supporting resolutions up to full HD 1080p/60.
- How does the front-panel status LED indicate signal lock?
- The front panel Status LED indicates input/output format and signal state: green means the SDI signal is locked, and red means it is un-locked.
- What deployment scenarios suit the SDI-HDRPTPRO?
- It is suited for surveillance systems, rental and staging, post-production, TV studio, and digital cinema applications that need to extend an SDI run beyond a single cable's reach using re-clocking and signal equalization.