Name: 4K60 HDMI-to-CAT Wall Plate TX for Flex Matrix Pro
Brand: KanexPro
SKU: FLEX-PROCATWP-TX

Question 1

What is the maximum resolution and bandwidth supported by the FLEX-PROCATWP-TX?

Accepted Answer

Up to Ultra HD/4K (4096x2160, 4:4:4 @50/60Hz) at an 18Gbps data transfer rate, with HDCP 2.2 compliance and HDR support.

Question 2

What audio formats pass through the FLEX-PROCATWP-TX?

Accepted Answer

Dolby Digital, Dolby Digital Ex, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, and LPCM up to 8 channels.

Question 3

How is the FLEX-PROCATWP-TX controlled from a third-party system?

Accepted Answer

The unit provides bi-directional RS-232 via a Phoenix connector for endpoint control, allowing a control system to command the transmitter directly.

Question 4

Which chassis card does the FLEX-PROCATWP-TX pair with?

Accepted Answer

It connects directly to the Flex Pro CAT input card (FLEX-PROCAT-IN) on the matrix chassis.

Question 5

What is the maximum transmission distance for the FLEX-PROCATWP-TX?

Accepted Answer

It transmits video, audio, and bidirectional RS-232 up to 330ft (100m) over a single CAT6A cable, delivering uncompressed 4K60 4:4:4.

Question 6

How is the FLEX-PROCATWP-TX powered?

Accepted Answer

It can be powered by a DC 12V AC/DC adapter or via PoC (PoE Injector) from the chassis, drawing up to 10 watts maximum. The power supply accepts 100-240VAC 50/60Hz.

Question 7

No video appears at the display end of the FLEX-PROCATWP-TX link, what should I check first?

Accepted Answer

Confirm the CAT6A run does not exceed the rated 330ft (100m) distance, verify the wall plate has power (via its DC 12V adapter or PoC/PoE Injector), and confirm the HDMI source is active and connected to the HDMI input.

Question 8

HDCP content will not display through the FLEX-PROCATWP-TX, what should I verify?

Accepted Answer

Confirm the wall plate and connected chassis/receiver are both HDCP 2.2 compliant, and use EDID/HDCP management to match EDID to the display's native resolution and HDCP capability.

Question 9

What advantage does the FLEX-PROCATWP-TX offer over a standard in-line transmitter?

Accepted Answer

Its 1-gang Decora-style wall plate form factor lets integrators mount the HDMI-to-CAT transmitter directly in a wall box at the source location, keeping the room free of loose transmitter boxes while still reaching 330ft (100m) over CAT6A.

Question 10

Is the FLEX-PROCATWP-TX suitable for government-spec AV projects?

Accepted Answer

Yes, it is TAA compliant, making it eligible for use in U.S. government procurement.