Flex Matrix Pro 64×64 4K60 Crosspoint Modular Matrix Switcher
KanexPro FLEX-PRO64X64 enterprise 64x64 crosspoint matrix routes HDMI, DisplayPort, HDBaseT, fiber optic, and 12G-SDI at 4K60 with native Dante/AES67…
At 64×64, the Flex Matrix Pro enters territory traditionally owned by Crestron and Lightware — at roughly half their price. Sixteen input and sixteen output card slots deliver 64 fully routable crosspoints across five signal formats: HDMI, DisplayPort, HDBaseT 3.0, fiber optic, and 12G-SDI. Every path supports 4K60 4:4:4 at 18Gbps with HDCP 2.2, HDR, and seamless switching. Native Dante/AES67 replaces external audio matrices. Fiber cards span 2km between buildings. Redundant PSUs and PoC deliver enterprise reliability. TAA compliant.
- Up to 64 inputs and 64 outputs via hot-swappable 4-port modular cards across five signal formats
- Multi-format I/O: HDMI 2.0, DisplayPort, CAT/HDBaseT 3.0 (330ft), Fiber Optic (2km singlemode), and 12G-SDI
- 4K/UHD 60Hz 4:4:4 at 18Gbps with HDCP 2.2, HDR, and seamless switching on every crosspoint
- Native Dante/AES67 audio networking via built-in MCU card
- Redundant hot-swappable power supplies for mission-critical reliability
- PoC (Power over CAT) delivers power to connected transmitters and receivers from the main chassis
- Video wall, quad view, independent scaling, CEC control, EDID/HDCP management
- TAA compliant for U.S. government procurement
Specifications| Standard | HDMI 2.0, HDCP 2.2 |
|---|
| HDR | Supported |
|---|
| Max Data Rate | 18 Gbps / 11.88 Gbps (12G-SDI) |
|---|
| Max Resolution | 4096×2160 @60Hz 4:4:4 |
|---|
| Network Audio | Dante/AES67 |
|---|
| Pass-through | LPCM 8ch, Dolby TrueHD, DTS-HD MA |
|---|
| Input Slots | 16 slots × 4 ports = 64 inputs |
|---|
| Output Slots | 16 slots × 4 ports = 64 outputs |
|---|
| Card Types | HDMI, DP, CAT, Fiber, 12G-SDI |
|---|
| CAT | 330ft (100m), PoC |
|---|
| Fiber | MM 984ft / SM 6,562ft |
|---|
| Power | Redundant hot-swappable PSUs |
|---|
| Compliance | TAA |
|---|
Questions
- What is the maximum I/O capacity of the FLEX-PRO64X64 chassis?
- The FLEX-PRO64X64 is a fully modular 64x64 crosspoint matrix with 16 input card slots and 16 output card slots, each accepting a 4-port card, for up to 64 inputs and 64 outputs total.
- What video performance does the FLEX-PRO64X64 support?
- The chassis routes 4K/UHD signals at up to 4096x2160 @60Hz 4:4:4 with an 18Gbps data rate (11.88Gbps for 12G-SDI), HDCP 2.2 compliance, HDR support, and seamless glitch-free crosspoint switching.
- How is the FLEX-PRO64X64 controlled?
- Control is available through the 7-inch front panel capacitive touchscreen, TCP/IP (RJ45) with Web GUI, bi-directional RS-232 to endpoints, Dante Controller software, and Dante Domain Manager.
- Does the FLEX-PRO64X64 support video wall and multi-view layouts?
- Yes. The chassis supports video wall, quad view multi-viewing, independent output scaling, and CEC display control, along with EDID/HDCP management and preset save and recall.
- Are the I/O cards hot-swappable?
- Yes, all input and output cards, the FLEX-MCU-Dante card, and both power supplies are hot-swappable, allowing service without powering down the chassis.
- How are remote CAT endpoints powered?
- PoC (Power over CAT) delivers power to FLEX-PROCAT-TX and FLEX-PROCAT-RX endpoints directly from the chassis, eliminating the need for local power adapters at each endpoint.
- No video on one or more outputs, what should I check?
- Verify the output card is fully seated and its LED shows normal operation, confirm the source is active on the corresponding input card, and for CAT/Fiber outputs confirm the receiver is powered (or PoC is enabled) and connected. Try matching EDID to the display's native resolution.
- Dante audio is not routing between devices, what is the fix?
- Confirm the FLEX-MCU-Dante card is installed and its LAN port is connected to the Dante network, open Dante Controller to verify the device is visible, and check that audio routes are configured in Dante Controller.
- Why choose the FLEX-PRO64X64 for enterprise-scale deployments?
- The FLEX-PRO64X64 is TAA compliant for U.S. government procurement, and its 64x64 crosspoint with redundant power and native Dante/AES67 audio supports enterprise multi-format 4K distribution at scale.
- What advantage does a 5-format crosspoint offer over single-format matrices?
- Consolidating HDMI, DisplayPort, HDBaseT, fiber, and 12G-SDI routing into one 64x64 chassis eliminates the need for separate matrix infrastructure per signal type, simplifying large-venue AV designs that must support mixed source and display formats.