What the AUD2ACV Digital-to-Analog Audio Decoder Does and When to Specify It
The AUD2ACV converts optical TOSLINK or coaxial S/PDIF audio to analog stereo on RCA R/L at 48 kHz, powered by an included 5V 1A supply.
Full SKU guide — find the right Dante device for your application
KanexPro offers a complete Dante audio line under the AUD-DTE- prefix. All products connect to a managed Ethernet switch, are discoverable in Dante Controller, and support AES67. All adapters (except AUD-DTE-2CHAMP) are PoE powered.
Dante Input Adapters — Signal → Dante Network
| SKU | Input Type |
|---|---|
| AUD-DTE-ECODE | Bal/Unbal Analog, 5-level sensitivity, PoE |
| AUD-DTE-LINEIN | Bal/Unbal Analog, compact, PoE or USB-C |
| AUD-DTE-XLRIN | XLR Professional Balanced, PoE |
| AUD-DTE-HDMI | HDMI Embedded Audio, no analog stage, PoE |
| AUD-DTE-BT | Bluetooth 5.1, APTX-LL & APTX-HD, PoE |
USB Interfaces & Outputs — Bidirectional / Dante → Signal
| SKU | Type & Connection |
|---|---|
| AUD-DTE-USB | USB-A bidirectional, Windows/Mac, PoE |
| AUD-DTE-USBC | USB-C bidirectional, driver-free, PoE |
| AUD-DTE-DCODE | Dante → Bal/Unbal Analog out, PoE |
| AUD-DTE-LINEOUT | Dante → Analog out, 5-level gain, PoE or USB-C |
| AUD-DTE-XLROUT | Dante → XLR Balanced out, PoE |
| AUD-DTE-2CHAMP | 150W Class D Amp + DSP, Lo-Z/Hi-Z 70V/100V, AC power |
Quick Selection
| Use Case | Recommended |
|---|---|
| Analog/line → Dante | AUD-DTE-ECODE or AUD-DTE-LINEIN |
| XLR source → Dante | AUD-DTE-XLRIN |
| HDMI audio → Dante | AUD-DTE-HDMI |
| Bluetooth → Dante | AUD-DTE-BT |
| PC/laptop → Dante | AUD-DTE-USB (USB-A) / AUD-DTE-USBC (USB-C) |
| Dante → analog amp or mixer | AUD-DTE-DCODE or AUD-DTE-LINEOUT |
| Dante → XLR equipment | AUD-DTE-XLROUT |
| Dante → drive speakers direct (with DSP) | AUD-DTE-2CHAMP |
