SW-5X1PS-70M Audio: Dante, Line Levels and the 3×3 Matrix
SW-5X1PS-70M mixes analog and Dante 2×2 audio in a 3×3 matrix with a 31-band EQ, 0–50ms delay and level on every output, as LPCM 2.0 at 48kHz.
Overview
KanexPro Video Wall Controllers distribute a single source image across multiple displays in a tiled layout. Three models are available, ranging from a simple 1×4 processor to a full 4×4 seamless matrix with integrated video wall mode.
SKUs
| SKU | Title | Key Differentiator |
|---|---|---|
| VW-SP1X44K | 1×4 HDMI 4K UHD Video Wall Processor with Bezel Correction | Simple 1×4 wall, up to 9 displays, IR remote control |
| VW-HDUSBC1X4 | 4K60 HDMI/USB-C 1×4 Video Wall Controller | USB-C input, 8 display modes, audio de-embedding, RS-232 |
| MMX-4X4VW | 4K 4×4 Seamless Matrix & Video Wall Processor | 4×4 matrix + video wall in one unit, seamless switching |
VW-SP1X44K
A straightforward HDMI 1×4 video wall processor. Connect one HDMI source and distribute it across up to 4 (and in extended configurations up to 9) displays. Layout selection and bezel correction via IR remote. 4K UHD resolution support. Best for simple digital signage walls and information displays.
- Input: 1× HDMI
- Outputs: 4× HDMI
- Supported layouts: 2×2, 1×4, 1×3, 1×2, 1×1 clone, extended up to 3×3
- Bezel correction: Yes (IR remote)
- Control: IR remote, RS-232
VW-HDUSBC1X4
A compact 4K60 video wall controller with both HDMI and USB-C inputs. Supports 8 built-in display modes including portrait rotation variants — useful for signage walls with mixed landscape and portrait displays. Includes audio de-embedding to balanced analog output.
- Inputs: 1× HDMI, 1× USB-C
- Outputs: 4× HDMI
- Display modes: 8 (including 2×2, 1×4, 4×1, clone, portrait rotation)
- Audio: De-embedded balanced analog output
- Bezel correction: Yes
- Control: Front panel, RS-232
MMX-4X4VW
A 4×4 seamless HDMI matrix switcher with integrated video wall mode. Route any of 4 sources to any of 4 displays in matrix mode, or switch to video wall mode to tile one source across all 4 outputs. Seamless switching means no blackout during source transitions. Best for command centers, boardrooms, and applications requiring both matrix routing and video wall flexibility in a single unit.
- Inputs: 4× HDMI
- Outputs: 4× HDMI
- Matrix mode: Any input to any output
- Video wall mode: 2×2 or 4×1 layout
- Seamless switching: Yes (no blackout)
- Bezel correction: Yes
- Control: Front panel, web GUI, RS-232, IP
Choosing the Right Model
- Simple 1×4 wall, HDMI only: VW-SP1X44K
- USB-C laptop source or portrait displays needed: VW-HDUSBC1X4
- Multiple sources + video wall + seamless switching: MMX-4X4VW
Related Articles
- Features & Configuration: Video Wall Setup & Bezel Correction
- Application Notes: Video Wall Deployment
- Installation Guide: Hardware Setup and Connections
- Getting Started: Collaboration Solutions Overview
