KanexPro Support Assistant

Describe your setup, the part number, and what you are seeing.

Before we start

So the team can follow up if this needs a person.

Used only to follow up on this request. See our Privacy Policy.

General enquiry

Tell us what you need and the right person will come back to you.

Used only to answer you. See our Privacy Policy.

Support

Knowledge base

Setup, configuration and fault-finding for KanexPro products.

Application Notes: Dante in Corporate AV Installations
Audio

Application Notes: Dante in Corporate AV Installations

Boardrooms, conference rooms, campuses, lobbies — real-world deployment scenarios Corporate AV is among the most practical deployment target for…

Network Setup: Configuring Your Switch for Dante
Audio

Network Setup: Configuring Your Switch for Dante

Setup Guide Configuring Your Network Switch for Dante Required switch settings for all KanexPro AUD-DTE- Dante products Dante requires a managed…

Troubleshooting & FAQ: Flex Matrix
Flex Matrix

Troubleshooting & FAQ: Flex Matrix

No Signal on an Output Verify the output card is fully seated in the chassis slot — remove and re-seat if uncertain. Confirm the source is active and…

Installation Guide: Hardware Setup and Connections — Collaboration
Collaboration

Installation Guide: Hardware Setup and Connections — Collaboration

Overview This guide covers physical installation of KanexPro Collaboration products — Huddle Room switchers, Presentation switchers, and Video Wall…

Installation Guide: Hardware Setup and Connections — AV Over IP
AVO-IPJP2KWPM

Installation Guide: Hardware Setup and Connections — AV Over IP

Install KanexPro AV over IP endpoints: rated cable within 100 m, PoE or DC 12V power, LED checks, and the AVO-IPJP2KWPM 2-gang wall plate.

Features & Configuration: Built-In Video Wall
Flex Matrix

Features & Configuration: Built-In Video Wall

FLEX-MF chassis have a built-in video wall with bezel compensation, up to 4×3 (12 displays) per wall on FLEX-MF16X20, FLEX-MF24X36 and FLEX-MF24X60.

FAQ: Collaboration & Huddle Room
Collaboration

FAQ: Collaboration & Huddle Room

General What is the difference between the Huddle Room, Presentation, and Video Wall subcategories? Huddle Room switchers (COL-HUD series) are…

Product Guide: Dante Output Adapters (AUD-DTE-DCODE, LINEOUT, XLROUT)
AUD-DTE-DCODE

Product Guide: Dante Output Adapters (AUD-DTE-DCODE, LINEOUT, XLROUT)

AUD-DTE-DCODE · AUD-DTE-LINEOUT · AUD-DTE-XLROUT Three Dante output adapters that receive audio from the Dante network and convert it to an analog…

Getting Started: Flex Matrix Overview
Flex Matrix

Getting Started: Flex Matrix Overview

What is the FLEX Matrix? The KanexPro FLEX Matrix is a modular 4K60 matrix switcher — a single chassis that routes any HDMI source to any display, at…

Features & Configuration: Independent Per-Output Scaling & EDID Management
FLEX-MF24X36

Features & Configuration: Independent Per-Output Scaling & EDID Management

Each FLEX-MF24X36 output scales on its own to Auto or one of 15 fixed timings from 480p60 to 4K60, including 1920×1200@60.

Installation Guide: Hardware Setup
Controls

Installation Guide: Hardware Setup

Overview This guide covers the physical installation of KanexPro Controls products — processors, expanders, keypads, and touch panels. Complete…

Product Guide: Control Processors
Controls

Product Guide: Control Processors

Overview KanexPro control processors are the central intelligence of an AV control system. They run user-defined scripts, manage event-driven logic…